Gas Based Fire Suppression System

Gas Based Fire Suppression System Specification

Energy Efficiency Rating
Not applicable (Non-electric, pneumatic and gas powered operation)

Technology
Clean Gas Suppression (Inert Gas or Chemical Clean Agent)

Control Type
Automatic and Manual

Voltage
24V DC (system control panel)

Shape
Cylindrical (standard)

Installation Type
Fixed (Ceiling or Wall Mount)

Fire Class
Class A, B, C

Mounting Type
Floor Mounted with Stand or Wall/Cabinet Mountable

Operating Pressure
Standard 25 bar / 42 bar

Fire Extinguisher Type
Total Flooding Clean Agent System

Connectivity Type
Hardwired (integration with fire panels), Network-ready options

Features
Zero-residue, Non-conductive, Fast acting, Eco-friendly, No damage to equipment, Low downtime

Coverage Area
Up to 200 m² per system (expandable based on design)

Coating Type
Corrosion-resistant, Powder coated

Working Temperature
-10°C to +55°C

Application
Server Rooms, Data Centers, Electrical Panels, Archive Rooms, Control Rooms, Telecommunication Facilities, Laboratories, Sensitive Equipment Areas

Max Flow Rate
Based on agent and design (typical: up to 20 kg/sec)

Capacity
5 kg to 80 kg per cylinder (customization possible)

Diameter
Configuration dependent (standard cylinder: 180 mm to 250 mm)

Pressure
25 bar / 42 bar (agent/cylinder dependent)

Pipe Material
Galvanized Steel, Stainless Steel

Alarm Integration
Can interface with audio/visual alarm systems

Discharge Time
Less than 10 seconds

Cylinder Material
Seamless Steel or Alloy Steel

Agent Type
FM-200, Novec 1230, Inergen, CO2 (specified while ordering)

Refill & Recharge
Onsite or Factory based

Response Time
Immediate upon detection (typically 3 seconds)

Noise Level
<90 dB (at discharge point)

Release Mechanism
Electromechanical Solenoid, Manual Pull Station

System Life
10-15 years (with proper maintenance)

Detection Method
Smoke and Heat Detectors (conventional/addressable)

Gas Based Fire Suppression System Trade Information

Minimum Order Quantity
1 Unit

Supply Ability
2 Units Per Week

Delivery Time
10-15 Days

Gas Based Fire Suppression System About

Gas Based Fire Suppression System availed by us is designed by using advanced technologies and engineering materials that result in high reliability and sturdiness. This cylinder-based system can be used in residential as well as commercial buildings to greatly reduce the risk of fire hazards. It is equipped with automatic actuators. The elements of the offered Gas Based Fire Suppression System are made up of premium-quality materials that give high durability and strength to bear extreme temperatures and pressures.

Comprehensive Fire Protection Technology

This clean agent gas suppression system utilizes advanced inert and chemical agents such as FM-200, Novec 1230, Inergen, or CO2, providing robust protection against Class A, B, and C fires. Engineered to be zero-residue and non-conductive, it is perfect for environments where sensitive equipment is present and minimizing downtime is critical.

Rapid Detection and Activation

Equipped with both smoke and heat detectorsavailable in conventional or addressable formatsthe system ensures fires are detected promptly, typically triggering suppression within 3 seconds. The release mechanism combines electromechanical solenoids and manual pull stations for both automatic and manual system activation.

Customizable Installation and Coverage

Designed for adaptability, cylinders come in various sizes (5 kg to 80 kg) and can be floor-mounted or wall/cabinet-mounted, with corrosion-resistant coatings for lasting durability. The system supports hardwired and network-ready configurations, allowing easy integration with existing fire panels and alarm solutions.

FAQs of Gas Based Fire Suppression System:

Q: How does the Gas Based Fire Suppression System detect and respond to fire incidents?

A: The system uses advanced smoke and heat detectors, available in both conventional and addressable models, to identify fire threats quickly. Upon detection, it activates the suppression processeither automatically or manuallytypically discharging the agent within 10 seconds, with a rapid response time of less than 3 seconds after fire detection.

Q: What types of fire suppression agents are supported, and how are they chosen?

A: This system supports FM-200, Novec 1230, Inergen, or CO2 agents. The specific agent can be selected at the time of ordering based on the applications requirements, space characteristics, and equipment sensitivity. Each agent provides clean, fast-acting suppression suitable for critical and sensitive areas.

Q: When and where is this system most effective for deployment?

A: Ideally suited to server rooms, data centers, control rooms, archive rooms, telecommunication facilities, laboratories, electrical panels, and other spaces with sensitive equipment, it is effective anywhere swift, clean, and non-damaging fire suppression is paramount.

Q: What is the installation and maintenance process for the system?

A: The system is installed as a fixed unitceiling or wall-mountedand uses seamless steel or alloy steel cylinders with galvanized or stainless steel piping. Maintenance includes periodic inspection and refilling or recharging, which can be done onsite or at authorized factories. With regular servicing, system longevity ranges from 1015 years.

Q: How does the system ensure safety for equipment and occupants during operation?

A: The systems clean agents are non-conductive and leave zero residue, ensuring no corrosion or damage to electronics. It operates at noise levels below 90 dB to minimize disruption, and its eco-friendly design means no harm to people or the environment during discharge.

Q: Can the system be integrated with building alarm and network systems?

A: Yes, the suppression system is designed for flexible connectivity and can interface with audio/visual fire alarm panels via hardwired or network-ready connections, enabling centralized monitoring and control from the buildings fire safety infrastructure.