|
English
Spanish
French
German
Italian
Chinese (Simplified)
Japanese
Korean
Arabic
Portuguese
Tikidan Primer
Product Details:
- Warranty 1 Year
- Usage Industrial
- Product Type Tikidan Primer
- Click to View more
Tikidan Primer Price And Quantity
- 130 INR/Liter
- 100 Liter
Tikidan Primer Product Specifications
- 1 Year
- Industrial
- Tikidan Primer
Tikidan Primer Trade Information
- 10000 Liter Per Week
- 1 Week
Product Description
TIKI PRIME S is a Ready to use Single Component Quick Drying Low Viscosity Primer in Liquid Form. It is prepared using Special Grade Bitumen under Controlled Condition in Refined Solvent.
USES It is used as Primer on Concrete, Masonry, Metal, Asbestos Sheet, Wood and Stone Surfaces for Sealing Substrate Pores and Promote Adhesion of Bitumen Based Waterproofing Systems, whether Liquid, Felts or Membranes with the Substrate.
ADVANTAGES
- High Penetrating Power Provides Excellent
- Adhesion to the Substrate
- Low Viscosity - Ease of Application
- Good Resistance to Mild Acids/Bases, Salt Solution
- High Resistance to Freeze Thaw Cycles
- No Heating Required - User Friendly
- Forms Water Impermeable Film
- Improves Adhesion of Bituminous Waterproofing
- Systems with Substrate
- Binds left over Dust Particles during Substrate
- Preparation Increasing Bond
- Quick Drying and Bond Development compared to
- Water Based Primer
APPLICATION SURFACE PREPARATION The surface should be thoroughly cleaned to remove loose dust, foreign particles, rust, laitance, oil and other contaminants.
APPLICATION INSTRUCTIONS Apply TIKI PRIME S using Brush or Spray Gun 4to6 mSquare /Ltr. per coat depending upon the Porosity of the Surface uniformly wetting and covering entire surface Never apply TIKI PRIME S on Wet Surface or when it is raining .
Never use TIKI PRIME S as Waterproof Coating. Allow the TIKI PRIME S to dry completely, before proceeding for installation of Bituminous Waterproofing Systems.
Allow the TIKI PRIME S to dry completely, before proceeding for installation of Bituminous Waterproofing Systems.
Technical Specification
- Specific Gravity 25 DegreeC 0.90 0.05
- Viscosity in Seconds by Standard Tar /Viscometer of 4mm Orifice@25Degree C - 4 to 24
- Distillation Fractions Percent by Volume
- Up to 225 Degree C- Min. 35 /Up to 360 Degree C- Max. 65
- Flash Point by Pensky Martin Closed Cup - 40 Degree Celcius
- Test on Residue from Distillation up to 360 Degree Celcius -3cm/Min
- a) Ductility 27 Degree Celcius
- b) Penetration 25 Degree Celcius
- C 100gm, 5 Sec - 20 to 5 Dmm 99 Percent Min
- D) Matter Soluble in Carbon Di Sulphide or Carbon Tetra Chloride or Trichloroethylene by Weight
CLEAN UP Use Solvents for cleaning equipment and tools immediately after applying TIKI PRIME S.
SUPPLY TIKI PRIME S is supplied in standard pack sizes of 20 Ltrs. and 200 Ltrs. Capcity Tins / Drums.
STORAGE TIKI PRIME S must be stored above 5 Degree C. Store under the shed & protect from extremes of temperature. Keep container close when not in use.
SHELF LIFE Shelf life is 12 months when stored as above and in Original Sealed Container. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.
SAFETY PRECAUTIONS As with all chemical products, care should be taken during use and storage of TIKI PRIME S to avoid contact with eyes, mouth, skin and foodstuffs until product fully cured or dried. Treat splashes to eyes and skin immediately. If accidentally ingested, seek immediate medical attention. Keep away from children, animals and direct sources of high temperatures, naked flame and sparks. Reseal containers after use. Do not reuse containers for storage of consumable item.
Price:
- 50
- 100
- 200
- 250
- 500
- 1000+
Other Products in 'Response Indicators' category
Contact Details
GST : 27AAEPB5677L1ZE
Send Inquiry
|
 |
CEASE FIRE & ELECTRICAL SERVICES
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
